abf-04 series ac/dc power module 4w e-mail:sales@minmax.com.tw tel:886-6-2923150 2012/06/01 rev:8 page 1 of 3 features ? ultra-compact dimensions: 36.5x27x17.1 mm (1.44x1.06x0.67?) ? fully encapsulated module with solder pins for pcb mounting ? universal input 85-264 vac, 47-440 hz ? eco design, compliant to energy star specification and erp directive 2009/125/ec ? single- and dual output models ? protection class ll ? safety approval to cul/ul/iec/en 60950-1 ? over load and over voltage protection ? 3 year product warranty product overview the minmax abf-04 series is a new range of fully encapsulated ac/dc power supply modu les. they are designed for direct pcb moun ting with solder pins. the product features emi-filter to en55022, class b and ems compliance to the en 61000-4 standard. universal input voltage 85-264vac and international safety approval s qualifies these power modules for applications in products with worldwide markets. the abf-04 series provide a cost effective solution for many space critical applications in commercial and industrial electroni c equipment. model selection guide output current input current efficiency (typ.) output voltage max. @max. load max. capacitive load @max. load model number vdc ma ma(typ.) f % abf-04s03 3.3 1200 82 1200 70 abf-04s05 5 800 82 800 72 abf-04s09 9 444 77 440 75 abf-04s12 12 333 76 330 76 abf-04s15 15 267 76 260 76 abf-04s24 24 167 76 160 77 +5 600 5600 abf-04d53 +3.3 150 72 4700 72 +12 250 330 abf-04d125 +5 120 72 4700 75 abf-04d12 12 166 76 # 330 77 ABF-04D15 15 133 76 # 260 77 # for each output input specifications parameter model min. typ. max. unit input voltage range 85 --- 264 vac input frequency range 47 --- 440 hz input voltage range 120 --- 370 vdc no-load power consumption all models --- --- 0.3 w 115vac --- --- 15 a inrush current (cold start at 25 ) 230vac --- --- 25 a
abf-04 series ac/dc power module 4w e-mail:sales@minmax.com.tw tel:886-6-2923150 2012/06/01 rev:8 page 2 of 3 output specifications parameter conditions min. typ. max. unit single and dual output models --- 1.0 2.0 % output voltage accuracy abf-04d53 & abf-04d125 --- 2.0 5.0 % single and dual output models --- 0.5 1.0 % vo1 --- 0.5 1.0 % line regulation abf-04d53 & abf-04d125 vo2 --- 1.0 3.0 % 3.3vdc output model --- 1.0 1.5 % 5~24vdc and dual output models --- 0.5 1.0 % vo1 --- 0.5 1.0 % load regulation abf-04d53 & abf-04d125 vo2 --- 2.5 5.0 % 3.3v & 5vdc output models --- 100 150 mv p-p ripple & noise (20mhz) other output models --- 0.8 1.0 %v pp of vo single output and dual +/- output models no min. load required --- --- %inom. minimum load dual +/+ output models --- 25 --- %inom. over voltage protec tion zener diode clamp --- 120 --- % of vo temperature coefficient --- 0.01 0.02 %/ overshoot --- --- 5 %vout foldback, auto-recovery current limitation (long term overload condition may cause damage) 105 --- --- %inom. short circuit protection hiccup mode, indefinite (automatic recovery) general specifications parameter conditions min. typ. max. unit i/o isolation voltage input to output, 60 seconds 3000 --- --- vac i/o isolation resistance 500 vdc 100 --- --- m ? switching frequency --- 130 --- khz hold-up time --- 20 --- ms mtbf (calculated) mil-hdbk-217f@25 , ground benign 330,000 --- --- hours emc emission conducted and radiat ed en 55011 class b, en 55022 class b, fcc part 15 class b standard specification requirement performance criteria en61000-4-2 air 8kv cont. 4kv b en61000-4-3 80~1000mhz, 10v/m 80% am, 1khz modulation a en61000-4-4 ac port 2kv dc, sl, tl 2kv not less than 1 min. b en61000-4-5 1.2/50 s(8/20 s) ac dif. 1kv dc 0.5kv b 0.15~80mhz, 10vrms (functional earth ports included) en61000-4-6 80% am, 1khz modulation b en61000-4-8 50hz/60hz, 30a/m a 30%, 10ms b emc immunity according en61000-6-1 en61000-4-11 60%, 100ms, 95%, 5000ms c protection class ii according iec/en 60536 safety approvals cul/ul 60950-1,iec/en 60950-1 input fuse all models external fuse (recommended) 1a slow ? blow type environmental specifications parameter conditions temperature r ange (operational) ambient -25 +60 power derating +50 to +60 0.3w / storage temperature range -40 +85 over temperature protection at 90 (automatic recovery at 67 ) cooling free-air convection humidity (non condensing) --- 95 % rel. h
abf-04 series ac/dc power module 4w minmax technology co., ltd. 18, sin sin road, an-ping industr ial district, tainan 702, taiwan tel: 886-6-2923150 fax: 886-6-2923149 e-mail: sales@minmax.com.tw 2012/06/01 rev:8 page 3 of 3 notes 1 all specifications typical at ta=+25 , resistive load, 115vac, 60hz input voltage and after warm -up time rated output curr ent unless otherwise noted. 2 ripple & noise measurement bandwidth is 0~20 mhz 3 these power modules require a minimum out put loading to maintain specified regulat ion, operation under no-load conditions wil l not damage the power supplies however they may not meet all listed specifications. 4 all ac/dc modules should be externally fused at the front end for protection. 5 other input and output voltage may be available, please contact factory 6 specifications subject to change without notice package specifications mechanical dimensions pin connections pin single output d12/d15 d53/d125 1 nc 2 nc 3 +vout +vout +vout1 4 -vout common common 5 np -vout +vout2 6 ac(n) 7 ac(l) ? all dimensions in mm (inches) ? tolerance: 0.5 (0.01) ? pin diameter ? 0.6 0.1 (0.020.004) physical characteristics case size : 36.5x27.0x17.1mm (1.44x1.06x0.67 inches) case material : plastic resin + fibergl ass (flammability to ul 94v-0 rated) weight : 26g 21.00 [0.83] 3.00 [0.12] 27.0 [1.06] 36.5 [1.44] 2x3.75 [2x0.15] 3.75 [0.15] 1 2 3 4 5 6 7 7.50 [0.30] 25.25 [0.99] 7.50 [0.30] 14.00 [0.55] bottom view 17.1 [0.67] 4.0 [0.16] 0.60 [0.02]
|